Table 3-7 Description Of Zxsdr Rsuc's Interfaces - Zte ZXSDR RSUC User Manual

ZXSDR RSUC User Manual
Intermodulation spurious response
attenuation
Conducted spurious emissions and
radiated spurious emissions
Radio frequency Front End SWR
3.3.8 Interface Indices
The interface indices of ZXSDR RSUC is shown as

Table 3-7 Description of ZXSDR RSUC's interfaces

Type
CPRI
UE
SJ-20101019140047-002|2012-03-15 (R1.1)
In the presence of two interfering tones that are 60 dB
above the CDMA signal level, and are at offsets of 1.25
MHz and 2.05 MHz, and -1.25 MHz and -2.05 MHz from
the center frequency, the output power of the MS increases
by no more than 3 dB, and the FER is less than 1.5%.
< -80 dBm, measured within the BTS receive band
< -60 dBm, measured within the BTS transmit band
< 2.0
Description
Fiber/Cable
Um interface
3-8
Table 3-7.
Index
2CPRI interfaces: 1 CPRI for BBU or
upper-level RSU1 CPRI for lower-level RSU
1 Tx/Rx1 diversity receivers
ZTE Proprietary and Confidential