Table of Contents
Advertisement
ZXSDR RSUC User Manual
Do not wear any watch, hand chain, bracelet, ring or any other conductive objects
à
during such operations.
Prevent moisture from accumulating on the equipment during operations in a
à
damp environment.
l
Power Cable
Never install or uninstall power cables while they are live. Otherwise, the power cable,
when contacting a conductor, may result in sparks or electric arc causing a fire or even
damage to eyes.
Make sure of shutting off power supply before installing or disconnecting a power
à
cable.
Before connecting the power cable, make sure that the connecting cable and its
à
label are appropriate for the actual installation requirements.
l
Drilling Holes
It is not allowed to drill chassis holes without permission.
Unqualified drilling could damage wiring and cables inside the chassis.
à
Additionally, metal pieces inside the chassis created by the drilling could result
in a short circuit. Use insulation protection gloves and first move cables inside a
chassis away when drilling is necessary on a chassis.
Protect eyes during drilling as dust or flying debris may damage eyes.
à
Clean any debris in time after drilling.
à
l
Lightning
Do not perform high-voltage, AC, iron tower or mast operations in a thunderstorm.
Thunderstorms would give rise to a strong electromagnetic field in the atmosphere.
Therefore, the equipment must be grounded and protected in time against lightning
strikes.
SJ-20101019140047-002|2012-03-15 (R1.1)
Warning!
Warning!
Danger!
1-4
ZTE Proprietary and Confidential
Advertisement
Table of Contents
