Table 4-1 Zxsdr Rsuc Panel Button Description; Table 4-2 Zxsdr Rsuc Panel Indicator Description; Table 4-3 Interfaces On The Front Panel Of The Zxsdr Rsuc - Zte ZXSDR RSUC User Manual

Table 4-1 ZXSDR RSUC Panel Button Description

Button
RST
4.4 Indicators
Table 4-2

Table 4-2 ZXSDR RSUC Panel Indicator Description

Indicator
RUN
ALM
LNK
RF
4.5 Panel Interfaces
Table 4-3

Table 4-3 Interfaces on the Front Panel of the ZXSDR RSUC

Interface End A
ANT1(TX/RX) RSU
ANT2(RX) RSU
SJ-20101019140047-002|2012-03-15 (R1.1)
describes ZXSDR RSUC panel indicators.
Color Meaning
Green Running status
indicator
Red Alarm indicator
Green Optical link status
indicator
Orange RF working
status indicator
describes ZXSDR RSUC panel interfaces.
End B
Tx/Rx antenna
Rx antenna
Chapter 4 Hardware Decsripition
Description
Reset button
Description
Always on: The RSU is resetting or starting up.
Blinking at 1 Hz: The RSU is functioning properly.
Blinking at 5 Hz: The RSU is downloading version
files.
Off: The RSU fails the self-check.
Off: There is on alarm or the RSU is resetting,
starting up, or downloading version files.
Blinking at 5 Hz: There is a critical alarm.
Blinking at 1 Hz: There is a minor alarm.
Always on: The optical connection is normal.
Off: The optical fiber fails.
Blinking at 5 Hz: This link is used as the clock
reference source and the phase lock loop (PLL) is
in the fast capture state.
Blinking at 0.25 Hz: This link is used as the clock
reference source and the phase lock loop (PLL) is
in the tracing state.
Off: The RF has no output.
On: The RF has output.
Description
Connects to the Tx/Rx antenna for the Tx/Rx
major channel.
Connects to the antennal for the Rx minor antenna
4-3
ZTE Proprietary and Confidential