Intended Use - Bosch LR 6 Operating Instructions Manual

The tool is intended for detecting pulsating line lasers.
Inserting/Replacing the Battery
Alkaline batteries are recommended for the tool.
Pull the latch 16 of battery lid outward and open the battery lid 15.
When inserting batteries, pay attention to the correct polarity.
When the batteries become weak, the LED indicator 3 will begin
to flash. It is still possible to work with the measuring tool.
for extended periods, the batteries can corrode and discharge
themselves.
The numbering of the product features shown refers to the illustra-
tion of the tool on the graphic page.
1 Accuracy Button
2
On/Off button
3 Power indicator/Battery
warning
4 Audio signal button
5
Speaker
6 Direction LED "move
upward"
7 Center-indication LED
8
Direction LED "move
downward"
9 Reception area for the
laser beam
10 Magnets

Intended Use

Preparation
Remove the batteries from the tool when not
using it for extended periods. When storing
Features
11 Guide groove for
mounting bracket
12 Center mark
13 Type plate
14 Serial number
15 Battery lid
16 Latch of battery lid
17 Mounting bracket
18 Rotary knob of the
mounting bracket
19 Guide rail
20 Mounting bracket latch
21 Push-button to release
the lock
-7-