Bosch LR 6 Operating Instructions Manual page 6

Table of Contents

Advertisement

Available languages

Available languages

The A-weighted sound pressure level of the audio signal at one
meter distance is 80 dB(A).
Do not use the tool if the switch does not turn it on and off. Any
tool that cannot be controlled with the switch is dangerous and
must be repaired.
Store idle tool out of the reach of children and do not allow
persons unfamiliar with the tool or these instructions to oper-
ate the tool. Tools are dangerous in the hands of untrained users.
Maintain tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may af-
fect the operation. If damaged, tool repaired before use. Many
accidents are caused by poorly maintained tools.
Use the tool, accessories, etc., in accordance with these in-
structions and in the manner intended for the particular type of
tool, taking into account the working conditions and the work
to be performed. Use of the tool for operations different from
those intended could result in a hazardous situation.
Have your tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of
the tool is maintained.
Develop a periodic maintenance schedule for tool. When clean-
ing a tool be careful not to disassemble any portion of the tool
since internal wires may be misplaced or pinched or may be
improperly mounted. Certain cleaning agents such as gasoline,
carbon tetrachloride, ammonia, etc. may damage plastic parts.
Noise Information
Do not hold the tool close to your ear!
Use and care
Use the correct tool for your application. The
correct tool will do the job better and safer.
SAVE THESE INSTRUCTIONS.
Service
-6-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents