Vertex Standard EVX-5300 Operating Manual page 5

 Channel Number Indicator
Indicates the operating channel.
 Transceiver Status Indicator
The " A ", " B ", and " C " indicators show current transceiver status, which can
be customized via programming by your Vertex Standard dealer to meet your
communications/network requirements. The possible these indicators are ex-
plained below.
s
tatus
MONI
SCAN CH
Low Power
TA ( Talk Around )
Privacy ( Digital )
Encryption ( Analog )
Emergency
Horn Alert
PA ( Public Address )
Lock
ACC2
RFC
EVX-5300 O
pErating
c & c
ontrols
t
ransceIver
I
ndIcator
A B C
This indicator is illuminated constantly when the
signaling feature is disabled. The indicator blinks
while the audio is passing normally.
Illuminates the indicator when the scan enabled
channel is recalled
Illuminates the indicator when the radio's transmit-
ter is set to the "Low Power" mode
Illuminates the indicator when the "Talk Around"
function is activated.
Illuminates the indicator when the "Privacy" (Digital
mode) or "Voice Scrambler" (Analog mode) func-
tion is enabled.
Illuminates the indicator when the "Emergency"
feature is activated.
Illuminates the indicator when the "Horn Alert" fea-
ture is activated.
Illuminates the indicator when the radio is turned
to a PA amplifier.
Illuminates the indicator when the "Lock" feature is
activated.
Illuminates the indicator when the output port "2"
on the Accessory Connector is turned to "ON".
Illuminates the indicator when the radio is in the
"Ready for Communication" condition while operat-
ing with the 2-Tone or 5-Tone signaling.
M
anual
onnectors
s I
tatus ndIcator
d
escrIptIon
3