Vertex Standard EVX-5300 Operating Manual page 12

a o
dvanced peratIon
pa ( p )
a
uBlIc ddress
Press (or press and hold) the assigned PF key to use the transceiver as a PA ampli-
fier. The Public Address can be used even while scanning and receiving a call.
When the Public Address function is activated, the Transceiver Status Indicator
(" A ", " B " or " C ") will illuminate, if the "Public Address" status is assigned to
one of the Transceiver Status Indicator.
eXt acc 1
Activates the output port "1" of the D-Sub 15-pin Accessory Connector while
pressing the assigned PF key.
eXt acc 2
Press (or press and hold) the assigned PF key to toggle the output port "2" of the
D-Sub 15-pin Accessory Connector "On" and "Off".
e
mergency
The EVX-5300 series includes an "Emergency" feature in either analog or digital
modes, which may be useful for alerting another party monitoring on the same fre-
quency as your transceiver's channel.
Press the assigned PF key to initiate an emergency call on the pre-defined channel.
For further details contact your Vertex Standard dealer.
When the Emergency feature is activated, the Transceiver Status Indicator (" A ",
" B " or " C ") will illuminate, if the "Emergency" status is assigned to one of the
Transceiver Status Indicator.
l w
one orKer
Press (or press and hold) the assigned PF key to toggle the Lone Worker feature
"On" and "Off".
The Lone Worker feature is designed to emit an alarm for 30 seconds when the
Lone Worker Timer (programmed by your Vertex Standard dealer) has expired. If
the user does not reset the timer by pressing the PTT switch, the radio switches to
the Emergency mode.
cH u /d
p own
Press (or press and hold) the assigned PF key (generally the [  ]/[  ] key) to se-
lect a different channel.
10 EVX-5300 O M
pErating anual