H Orn A Lert - Vertex Standard EVX-5300 Operating Manual

sQl oFF -m
omentarIly
Opens the SQL to hear background noise (unmute the audio) while pressing the
assigned PF key.
B oFF
eep
Press (or press and hold) the assigned PF key to disable the radio beeps and the
channel announcement (if activated) temporarily. Again press (or press and hold)
the assigned PF key to enable the radio beeps and the channel announcement.
aF m v
InImum olume
Press (or press and hold) the assigned PF key to reduce the audio output to the
(lower) level programmed by your Vertex Standard dealer.
cH a
nnouncement
Press (or press and hold) the assigned PF key to select the channel change confir-
mation between "beep" and "announcement".
w
HIsper
Press (or press and hold) the assigned PF key to increase the microphone gain;
thus you can speak in a low voice (whisper) temporarily. Again press (or press and
hold) the assigned PF key to resume normal microphone gain.
voX
Press (or press and hold) the assigned PF key to turn the VOX function "On"
or "Off". You may disable the VOX function temporarily by pressing the PTT
switch.
voX a -t
ntI rIp
Press (or press and hold) the assigned PF key to toggle the VOX Anti-Trip feature
"On" and "Off". When the VOX Anti-Trip feature is set to "On", the transceiver
does not activate the transmitter section from the receiver audio and own beep
sound.
H a
orn lert
Press (or press and hold) the assigned PF key to turn the Horn Alert function "On"
or "Off". If you receive a call from the base station with the signaling, horn alert
will be activated and your vehicles horn will sound.
When the Horn Alert function is activated, the Transceiver Status Indicator (" A ",
" B " or " C ") will illuminate, if the "Horn Alert" status is assigned to one of the
Transceiver Status Indicator.
EVX-5300 O
pErating
a o
dvanced
-
M
anual
peratIon
9