Install Quuppa Ld-6L Main Unit To The Mounting Bracket - Quuppa LD-6L Installation Manual

The orientation indicator in the mounting bracket (p.7) may be used to
align Quuppa LD-6L according to a defined orientation in the
environment.
WARNING: Never attach, mount, or connect the mounting bracket to hot
surfaces. Always make sure that the surface can carry the weight of the
equipment before installation.
Not following general safety regulation can cause damage to objects or
injuries to people. Rely on qualified personnel for carrying out the
installation of Quuppa LD-6L.

Install Quuppa LD-6L main unit to the mounting bracket

1. Align Quuppa LD-6L main unit with the bracket by ensuring the
orientation mark in the mounting bracket is aligned with the
indicator lights on the Quuppa LD-6L main unit.
2. Lift Quuppa LD-6L main unit so that the mounting pins go
through the holes in the bracket (1).
3. Rotate the Quuppa LD-6L main unit (2) until you hear a 'click' (3).
4. Bend the safety lock down with a tip of a screwdriver to prevent
Quuppa LD-6L main unit being accidentally detached (4).
11 Quuppa LD-6L Installation Guide and Safety Information © 2013 Quuppa