Install The Quuppa Q17 Main Unit To The Mounting Bracket - Quuppa Q17 Installation Manual And Safety Information

Install the Quuppa Q17 main unit to the mounting bracket

1. Attach the Ethernet cable and the Micro USB cable if that is used.
2. You may use the connector cover to protect the connector area from dust and dirt.
3. Align Quuppa Q17 main unit with the bracket by ensuring the installation guide in the mounting
bracket is aligned with the indicator light on the Quuppa Q17 main unit (1).
4. Lift Quuppa Q17 main unit so that the bracket goes into the bracket mounting channel (1).
5. Rotate the Quuppa Q17 main unit (2) until you hear a 'click' (3).
11/19 Quuppa Q17 Installation Guide and Safety Information
Quuppa Oy, Keilaranta 1, 02150 Espoo, Finland
© 2018 Quuppa Oy