Contents Introduction..............................3 QT3-1 Tag Features............................4 Using the QT3-1 Tag............................5 Recycling and Disposal..........................9 QT3-1 Tag Certifications..........................10 FCC and IC Regulatory Statements......................11 Copyright and Other Notices........................13...
Activating the QT3-1 Before using the Quuppa QT3-1 you must activate it and configure it for your Quuppa system. To activate the tag, use the Button Press method, i.e. press the button for 1 second to activate the Quuppa QT3-1.
Page 6
Reset to Factory Settings To reset the device to factory settings hold the QT3-1 button side up and press the button until the LED turns off (5 seconds). While still pressing the button, turn the QT3-1 button side down. The LED will start blinking.
Page 8
Packaging and Storage The QT3-1 is shipped in a cardboard box. One box contains 5 pcs of QT3-1 and one overpack contains 10 such boxes, in total 50 pcs of QT3-1.