Dometic Coolmatic RPD50 Installation And Operating Manual page 10

Setting up and connecting the refrigerator
6.3 Changing the door hinge
4
You can also change the hinge of the door, so that it opens to the left rather than the
right.
To change the door hinge, proceed as follows (fig. 4):
➤ Remove the upper door hinge (fig. 4 1).
➤ Carefully lift out the door.
➤ Remove the threaded pins (fig. 4 2).
➤ Pull the locking hook (fig. 4 3) off the rod.
➤ Remove the locking plate (fig. 4 4) and fit it on the opposite side.
➤ Pull the rod downwards and out and put it in the other side.
➤ Fasten the locking hook (fig. 4 3) back on the rod.
➤ Detach the top and bottom lock holders (fig. 4 5) on the left side.
➤ Detach the top and bottom door hinges (fig. 4 1) on the right side.
➤ Fasten the top and bottom door hinges (fig. 4 1) to the left side.
➤ Fasten the top and bottom lock holders (fig. 4 5) to the left side.
10
3
2
5
4
1
RPD50
EN