Final Check List - Hoshizaki IM-21 Service Manual

6. FINAL CHECK LIST

1) Is the icemaker level?
2) Is the icemaker in a site where ambient temperatures are a minimum of 1°C and maximum
40°C all year around?
3) Is there at least 15 cm clearance around the icemaker for easy maintenance and service?
4) Have all shipping carton, tape(s) and packing been removed from the icemaker?
5) Have all electrical and piping connections been made?
6) Has the power supply voltage been tested or checked against the nameplate rating?
Has a proper earth been installed to the icemaker?
7) Has the water supply pressure been checked to ensure a minimum of 0.5 bar and maximum
8 bar?
8) Have the Compressor hold-down bolts and all refrigerant lines been checked against
vibration and possible failure?
9) Have the Bin Control Switch been checked for correct operation? When the icemaker is
running, push the Detector of the Bin Control Switch. The icemaker should stop within 10
seconds.
46