Wiring; Maintenance; Checks; Unit Repair And Excluded Liability - Siemens Milltronics L-300 Instruction Manual

Wiring

Note:
When installing the L-300 in a hazardous area, use suitable intrinsically safe
barrier strips.

Maintenance

Checks

If material sticks to the sensing plate, incorporate a program to ensure that the
impingement area remains clean. If sticking persists, contact your Siemens Milltronics
representative.
Check for wearing of the sensing plate. If wear is excessive, contact your Siemens
Milltronics representative.

Unit Repair and Excluded Liability

All changes and repairs must be done by qualified personnel and applicable safety
regulations must be followed. Please note the following:
• The user is responsible for all changes and repairs made to the device.
• All new components must be provided by Siemens Milltronics Process
Instruments Inc.
• Restrict repair to faulty components only
• Do not re-use faulty components.
Page 14
load cell A
R B W
E L H
D A I
C T
K E
Milltronics L-300 – INSTRUCTION MANUAL
load cell B
S
H
G W G
I
R H R
E
E I E
L
E T E
D
N E N
7ML19985EQ01