Milltronics L-300 Solids Flowmeter; The Manual - Siemens Milltronics L-300 Instruction Manual

Milltronics L-300 Solids Flowmeter

Milltronics L-300 solids flowmeter is a
medium-capacity flowmeter for various
product sizes, densities, and fluidities. The
sloped flowguide design conditions the
material into a repeatable flow pattern.
The flowmeter load cells output signals are
processed by the flowmeter integrator (ordered separately) to:
• monitor material flow
• maintain accurate
material inventory
• provide batch control for
process or loadout
purposes
• control the ratio of
materials in continuous
blending processes
Components of the Milltronics V Series flowmeter system:
• L-300 flowmeter housing and flowguide consisting of force sensing mechanism
consisting of two parallelogram load cells and stainless steel sensing plate
• electronic flowmeter integrator (ordered separately)

The Manual

This instruction manual covers the installation, operation and maintenance of the
Milltronics L-300 solids flowmeter.
Please refer to this manual for proper installation and operation of any component of the
system to which the L-300 is being applied. Adhering to the installation and operating
procedures will ensure a quick, trouble-free installation and allow for the maximum
accuracy and reliability of your weighing system. Because the L-300 solids flowmeter is
used in conjunction with an integrator, refer to the integrator's manual as well.
If you have any questions, comments, or suggestions about the manual contents, please
email us at techpubs@siemens-milltronics.com.
For the complete library of Siemens Milltronics manuals,
go to www.siemens-milltronics.com.
1.
additional equipment required
7ML19985EQ01
1
1
Milltronics L-300 – INSTRUCTION MANUAL
50°
material
discharge
material infeed
flow guide
sensing plate
impact force
housing (cabinet)
A B
A+ B
Page 1