Sensing Plate Mounting Details - Siemens Milltronics L-300 Instruction Manual

Sensing Plate Mounting Details

hex bot M8-1.25 x 25
(4) Hex nut M8-1.25 (4)
Flatwasher ø8 (8)
(Factory set)
Cable
cable (2) (Both
cables must be
left taut)
S.S hex nut M6-1 (4) with set
screw (Factory set)
7ML19985EQ01
dynamic beam
C
sensing plate (Install by
positioning ball of each cable
and then fixing sensing late
to dynamic beam). Top of
sensing plate must be level
in two planes.
Milltronics L-300 – INSTRUCTION MANUAL
Load cell (2)
hex screw M6-1 x 35(4)
hex nut M6-1(4)(set on both
sides for negative deflection of –
20 mV and a positive deflectin of
+30 mV, with 10 V DC excitation)
calibration pin
sensing plate fixing bolts M12-1.75
(TYP)
x C/W M12 lockwasher
socket head cap
screw M12-1.75x25 (8)
Lockwasher ø12(9)
static beam
calibration pulley (secure
with M6 socket head cap
screws
calibration weight
(applied to
calibration pin with
calibration cable
Page 5