KNX/EIB
InfoTerminal Touch
InfoTerminal Touch
Order-No. : 2072 ..
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Always disconnect device before working on it. At the same time, take into account all
circuit breakers that supply dangerous voltage to the device.
Do not operate the screen with sharp or pointed objects.
Do not use sharp objects for cleaning. Do not use acids or organic solvents.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
(1) Touch screen surface
3 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper
understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
carried out with the aid of KNX-certified software. The latest product database and technical
descriptions are always available on the homepage.
Intended purpose
-
Operating consumers and displaying the status of systems and information e.g. light
switching, dimming, controlling curtains, temperature and consumption values, emails or
messages etc.
-
Flush-mounted installation in hollow or solid walls in the interior
Product characteristics
-
Illuminated programmable TFT graphic colour screen, 320x240 pixels, 4096 colours
-
Touch screen, operation via touch directly on the screen
-
Installation position horizontal or vertical
32563342
10499271 I02
Figure 1: Front side
01.07.2011
1/14