Gira KNX/EIB Operating Instructions Manual page 7

KNX/EIB
InfoTerminal Touch
o Select Default settings
A confirmation request appears on the screen asking whether the default setting is to be
restored and whether all user data is to be deleted.
o If the user data is not to be deleted: Press No.
o If the default setting is to be restored: Press Yes.
The device initialises, the setting will be restored to default.
Light scenes will be deleted (names and values).
Timer data will be deleted.
Selected colour scheme and basic brightness will be reset.
Fault messages will be deleted.
Calibration data will be reset to the standard setting.
Stored emails, RSS feeds and value sets will be deleted.
The function will be logged in the past events memory.
i Project data and passwords are not affected when restoring the default setting.
Changing the password
o Open the Service page
o Select Administrator
o Select passwords
o Select the desired password level.
o Enter the new password.
o Accept the entry by pressing Save.
Viewing the past events
The device saves important events in the past events memory such as reset or the download of
program or project data. Simple operations will not be saved.
o Open the Service page
o Select Administrator
o Select Past events
Viewing the past events
Viewing the version
The Version page displays the current software version.
o Open the Service page
o Select Administrator
o Select Version
Details regarding the Version of the device are displayed.
Email functions
Emails can be displayed on the device when configured. The following requirements must be
fulfilled in order to use the email function:
- Connection to an IP-/Ethernet network
- Access to an email server in the Intranet or Internet
- mailboxes set up with the PC client software
The following functions are available:
- The displaying of 5 mailboxes
- The displaying of new emails
- The displaying of email texts
- Sending predefined emails, e. g. triggered by system events.
32563342 10499271 I02 01.07.2011 7/14