Functions
The deflection head can be turned in 90° increments and set to 5 approach direc-
tions. A selection of different actuators ensures that the Safety Switch can be
mounted in any position.
Figure 3.3: Approach directions
4
Functions
The Safety Switch signals to the safety switching device whether the protective
device is closed. Moving the actuator in closes the safety contacts; moving the
actuator out forces the safety contacts to open (e.g. upon opening of the protective
device). As a result, the machine can only be switched on if the protective device
is closed.
5
Applications
The Safety Switch can be used for e.g. the following protective devices:
• turning or swivelling moveable guards
• laterally moveable protective gratings or sliding gates
• protective flaps
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net