3
Specifications and Environment
Conditions
3.1
Specifications
Temperature
†
Range
Accuracy
Stability
Target Size
Target Emissivity
Resolution
Heating Time
Cooling Time
Power
Size (H,W,D)
Weight
Safety
†
When using a purge, the high and low range are reduced. This amount depends on the
flow and temperature of the purge.
‡
Temperature difference between the IR target surface and the reference probe are cal-
culated as shown in the graph in Figure 1 on page 10. Note: As the temperature of the
IR target surface increases, the temperature difference decreases.
–30°C to 150°C (-22°F to 302°F)
‡
±0.4°C (±0.72°F) [using 1/8" PRT]
±0.1°C (±0.18°F)
2.25" (57 mm)
0.95 (±0.02 from 8 to 14μM)
0.1° C or F
15 minutes (25°C to 150°C)
15 minutes (25°C to -20°C)
115 VAC (±10%), 1.5 A, or 230 VAC (±10%), 1.0 A, switchable,
50/60 Hz
152 x 286 x 267 mm (6 x 11.25 x 10.5")
4.6 kg (10 lb.)
OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per
IEC1010-1
Specifications and Environment Conditions
3
9