Chapter 1: Before You Begin; Safety Reminder; Safety Precautions - Midtronics GR8 1100 Instruction Manual

GR8 1100
!

Safety Reminder

For safe, efficient, and accurate charging and testing, review
the safety and operating instructions in this manual before
using the analyzer. In addition, follow all manufacturers'
instructions and BCI (Battery Council International) safety
recommendations.
We also recommend that you register the GR8 to activate your
warranty. See "Registering Your GR8" on the next page.
!

Safety Precautions

Inspect the battery for damages and check the electrolyte level.
If the electrolyte level is too low, replenish it and fully charge
the battery. Always use the necessary safety precautions when
working with batteries to prevent severe injury or death.
Follow all manufacturers' instructions and BCI (Battery Council
International) safety recommendations, which include the
following precautions:
DANGER—RISK OF EXPLOSIVE GASES: Batteries can pro-
duce a highly explosive mix of hydrogen gas and oxygen,
even when the battery is not in operation. Always work in a
well-ventilated area. Never smoke or allow a spark or flame
in the vicinity of a battery.
WARNING—REQUIRED BY CALIFORNIA PROP. 65: Bat-
tery posts, terminals, and related accessories contain lead
and lead compounds, chemicals known to the state of Cali-
fornia to cause cancer and birth defects or other reproduc-
tive harm. Wash hands after handling.
www.midtronics.com

Chapter 1: Before You Begin

9
• •
Chapter 1: Before You Begin
Battery acid is highly corrosive. If acid enters your eyes, im-
mediately flush them thoroughly with cold running water
for at least 15 minutes and seek medical attention. If bat-
tery acid gets on your skin or clothing, wash immediately
with a mixture of water and baking soda.
Always wear proper safety glasses or face shield when
working with or around batteries.
Keep hair, hands, and clothing as well as the analyzer cords
and cables away from moving engine parts.
Remove any jewelry or watches before you start servicing
the battery.
Use caution when working with metallic tools to prevent
sparks or short circuits.
Never lean over a battery when testing, charging, or jump
starting.
Never charge a frozen battery. Gases may form, cracking
the case, and spray out battery acid.
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527