Fema Electronica Series MAG-35 User Manual

Panel meters for process signals in vdc

Download this manual

Series

STANDARD

PANEL

METERS

Panel meters for PROCESS signals in Vdc

MAG-35-36

IDEAL SOLUTION to display process signals in 0/10 Vdc and similar up to

200Vdc, with display scaled in engineering units. Provides excitation

voltage output to power-up transducers. Available options for relay output,

analogue output, serial outputs and others. Multiple input signal ranges

selectable by internal jumpers.

USER'S MANUAL

(HT9693-r011206)

MAG-35

for process 0/10 Vdc and similar

FEMA ELECTRÓNICA - Page 1

Page 1 MAG-35 Series STANDARD PANEL METERS Panel meters for PROCESS signals in Vdc MAG-35-36 for process 0/10 Vdc and similar IDEAL SOLUTION to display process signals in 0/10 Vdc and similar up to 200Vdc, with display scaled in engineering units. Provides excitation voltage output to power-up transducers.
Page 2: General Specifications
User’s Manual - MAG-35 Process (Model 36) MAG-35-36 Model Instrument for PROCESS in Vdc Panel meter to measure process signals in 0/10 Vdc and similar, up to 200 Vdc. Display scalable in engineering units. Input ranges selectable by internal jumpers and scaling of the display by potentiometers.
Page 3: Declaration Of Conformity
User’s Manual - MAG-35 Process (Model 36) READING SCALE SELECTION FIGURE1 - DECIMAL POINT SELECTION Select the desired input range and the reading scale, by selecting the jumpers on the «MM» module, as shown on table below, and select jumpers «D» to light the decimal point (see figure1).
Page 4 other products Programmable Signal Converters & Large Displays Panel Meters Isolated Transmitters Standard Miniature Large Displays Panel Meters Panel Meters for TIME www.fema.es ELECTRONIC INSTRUMENTATION FOR INDUSTRY FEMA ELECTRÓNICA, S.A. Pol. Ind. Santiga - Altimira 14 (T14 - N2) E-08210 Barberà - BARCELONA ESPAÑA - SPAIN Tel.

Mag-35-36