Related Manuals for Extech Instruments MO290
Summary of Contents for Extech Instruments MO290
- Page 1 User's Guide Pinless Moisture/Humidity Meter + IR Model MO290 800.561.8187 information@itm.com www. .com...
-
Page 2: Meter Description
Introduction Congratulations on your purchase of the Extech MO290 Pinless Moisture Meter with Patented Built-in IR Thermometer. Monitor moisture in wood and other building materials with no surface damage with the Pinless Moisture sensor (Pin-type Moisture Probe included). Measure Humidity and Air Temperature with built-in probe plus non-contact InfraRed Temperature with patented IR design. -
Page 3: Battery Replacement
Remove one Philips head screw and lift off the rear battery cover. Replace the 9V battery. Secure the rear battery cover. Never dispose of used batteries or rechargeable batteries in household waste. As consumers, users are legally required to take used batteries to appropriate collection sites, the retail store where the batteries were purchased, or wherever batteries are sold. Disposal: Do not dispose of this instrument in household waste. The user is obligated to take end‐ of‐life devices to a designated collection point for the disposal of electrical and electronic equipment. Other Battery Safety Reminders o Never dispose of batteries in a fire. Batteries may explode or leak. o Never mix battery types. Always install new batteries of the same type. MO290-en-GB_V3.6 4/15 800.561.8187 information@itm.com www. .com... -
Page 4: Operation
The meter will enter a sleep mode after 30 minutes of inactivity. The meter will emit a warning beep 15 seconds before shutting down. To disable the APO feature, press the MODE button when turning the meter ON. The “APO” icon will not appear, indicating it is disabled. MO290-en-GB_V3.6 4/15 800.561.8187 information@itm.com www. - Page 5 WARNING: Do not directly view or direct the laser pointer at an eye. Low power visible lasers do not normally present a hazard, but may present some potential for hazard if viewed directly for extended periods of time. MO290-en-GB_V3.6 4/15 800.561.8187 information@itm.com www.
- Page 6 Press the power button to turn the meter on. Press the IRT button to turn on the IR thermometer and then release the button. Press the ▲or ▼button to set the desired temperature unit MO290-en-GB_V3.6 4/15 800.561.8187 information@itm.com www. .com...
-
Page 7: Specifications
6-8 weeks (4 hrs/day use), using alkaline batteries Auto Power Off (APO) After 30 minutes (nominal) inactivity. The APO function can be disabled by the user. APO Quiescent Current 50µA maximum Dimensions 165x70x38mm (6.5x2.8x1.5’) Weight 210g (7.4oz) Copyright © 2014‐2015 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form ISO‐9001 Certified www.extech.com MO290-en-GB_V3.6 4/15 800.561.8187 information@itm.com www. .com...
Need help?
Do you have a question about the MO290 and is the answer not in the manual?
Questions and answers