Polycom SoundPoint IP 450 Quick User Manual page 5

Updating ringtones
You can change the incoming ringtone, as well as set
distinct ringtones for contacts.
To change the incoming ringtone: To change the incoming ringtone:
1.
Press Press and then select 'Settings > Basic > and then select 'Settings > Basic >
Ring Type'.
2.
Scroll to the ring type you want. To hear the ring
type before you select it, press the 'Play' soft key.
3. Press the 'Select' soft key.
To set a ringtone for a contact:
1.
Press Press and then select 'Features > and then select 'Features >
Contact Directory'.
2.
Search for the contact (see 'Updating contact
directory').
3. Press the 'Edit' soft key and then scroll to 'Ring
Type'.
4.
Enter a number that corresponds to the ring
type you want. (To exit the screen and fi nd the type you want. (To exit the screen and fi nd the
number associated with a ring type, press
twice and then select 'Settings > Basic > Ring
Type').
5.
Press the 'Save' soft key.
Your company's settings may not allow you to set unique ringtones
for contacts.
0800 040 8888
v1 - 06/13
Using Headset Memory Mode
You can set up your phone so that all calls
automatically go to your headset.
To use Headset Memory Mode:
1. Press Press and then select 'Settings > Basic > and then select 'Settings > Basic >
Preferences > Headset > Headset Memory'.
2.
Scroll to 'Enabled' and then press the 'Select'
soft key.
3.
Activate Headset Memory Mode by pressing
twice. When Headset Memory Mode is activated,
the headset icon displays on the screen.
All calls will now go to your headset, unless you
switch to receiver or speakerphone mode.
To activate Headset Memory Mode again,
repeat step 3.
To disable Headset Memory Mode, repeat
steps 1 to 3, but select 'Disabled' in step 2.
working with daisy
www.daisygroupplc.com