Advertisement
6. INSTALL OUTSIDE SPINDLE, OUTSIDE ESCUTCHEON AND BASE PLATE ASSEMBLY:
Install base plate assembly onto inside of door. Use socket cap screws with washers on top standoffs and phillips head
screws on retractor assembly (bottom). Note that the cam on the outside escutcheon must be positioned with the dot at the
6 O'Clock position and inside spindle must be inserted as shown in details.
PASS WIRING HARNESS THROUGH
HOLE IN DOOR
INSIDE SPINDLE MUST BE
INSERTED AS SHOWN
Form 55005 Rev. B
CM5500 COMPUTER MANAGED MORTISE LOCK
1"
BASE PLATE ASSEMBLY
6
INSTALLATION MANUAL
DETAIL
OUTSIDE
SPINDLE
CAM
POSITION
-
DOT
FACES
DOWN
CAUTION!
If any fasteners such, as washers,
fall behind the PC board, remove
them prior to installing batteries.
SOCKET CAP
SCREW
PHILLIPS HEAD
SCREWS
,
WASHERS
09-25-2001
Advertisement
