Advertisement
Quick Links
Advertisement
Related Manuals for Janam LPT20 Series
Summary of Contents for Janam LPT20 Series
- Page 1 LPT20 Series mobile computer Quick Start Guide...
- Page 2 Features front and side views Power button Keypad LCD display Charging LED Status LED USB connector Lanyard hole Stylus Scan / action button Action button Battery cover Scan / action button Up button Down button...
- Page 3 Features rear, top and bottom views Data capture window Stylus Speaker Label recess Battery cover latch Battery cover Handstrap clip USB Connector Handstrap bar Reset Key Battery cover switch...
-
Page 4: Getting Started
Getting started installing card and battery Installing MicroSD card Remove battery if necessary Insert MicroSD card into the card slot Make sure the card connector (the golden contacts) should be at the front of insert Installing battery – If battery cover is installed on the device, slide the battery latch to the left. -
Page 5: Removing Battery
Getting started installing card and battery Removing battery Slide the battery latch to the left. The battery cover will lift up slightly, grasp the battery cover and remove it Remove the battery, right side first, from the battery compartmen... - Page 6 Getting started Installing handstrap Separate the velcro of the handstrap. Feed the loose end of the extended handstrap through the handstrap clip Wrap the handstrap around the clip and fasten together to close the strap Calibrating screen For turn on the device 1 time Follow the instructions on the welcome utility screen Tap 5 crosses as appeared on the screen to calibrate the touch screen...
- Page 7 Getting started Enabling & disabling WiFi Enabling WiFi Tap Start Menu, then tap and hold the Settings Select Network Connections Tap and hold AR6K_SD1 icon, make sure it is Enable Double click the Network icon on the status bar, pick the desired AP and setup as the wireless AP properties as usual Disabling WiFi Tap Start Menu, then tap and hold the Settings...
- Page 8 Getting started Enabling & disabling BT Enabling Bluetooth Tap Start Menu, then tap and hold the Settings Select Control Panel Double click Bluetooth Device Properties icon Pick the Tools menu and then select Turn on Bluetooth item Select Search Device and carry out bluetooth device operations as usual Disabling Bluetooth Tap Start Menu, then tap and hold the Settings Select Control Panel...
- Page 9 Getting started Soft and hard reset Performing soft reset Slide the battery latch to the left and grasp the battery cover and remove it Reset key Use a stylus to press the reset key and release The device is reset Performing hard reset Slide the battery latch to the left and grasp the battery cover and remove it...
- Page 10 Getting started Refreshing ROM Refreshing LPT20 ROM Copy NK.bin, EBOOT.nb0 and splash.bin (optional) to the root directory of the microSD card Open the battery cover, remove the battery Insert the microSD card Press and hold the left and right side Scan / Action button Install the battery to the battery compartment Continue to press and hold the left and right...
- Page 11 Getting started Capturing data...
- Page 12 Getting started Battery warning Battery safety guidelines Use manufacturer’s original battery and charger only. Any incompatible battery or charger may result in in a fire, explosion, or other hazard. Do not disassemble or open, crush, bend or deform, puncture, or shred the battery Do not short circuit a battery by allowing conductive materials to contact the battery terminals.
-
Page 13: Statement Of Compliance
Statement of Compliance CE Marking and European Economic Area (EEA) Hereby, Portable Innovation Technology Ltd. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive, 1999/5/EC. Radio Frequency Interference Requirements-FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. - Page 14 Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the LPT20 Series and is the answer not in the manual?
Questions and answers