JEFF ROWLAND CAPRI S2 Operational Manual page 8

Plug-in phono cards (installed internally) converts Line Input 1
OPTIONAL PHONO CARD:
to high performance phono input. Three gain and loading options can accommodate
moving magnet (MM), moving coil (MC), and high output moving coil cartridge types.
Plug-in DAC card (installed internally) converts Line Input 1 to
OPTIONAL DAC CARD:
high performance DAC input. Accepts all SPDIF digital signal sources from 44.1 to 192
kHz sampling rates and adjusts accordingly.
HOME THEATRE BYPASS ADJUSTMENT: The Home Theatre BYPASS RCA inputs can be
changed to an additional set of standard inputs by placement of an internal jumper
inside the unit.
DISPLAY OFF (5 SEC): An internal jumper will place the display in an automatic OFF
condition after 5 seconds from any operational command and illuminates again for 5
seconds after additional commands are initiated.
Six-function remote control transmitter adjusts volume, input
REMOTE CONTROL:
selection, mute, channel balance with display, display dimming and turn-off, and
control of absolute phase.
All signal connectors are rhodium plated, copper jacks
HIGH-QUALITY CONNECTORS:
(RCA) and Neutrix silver plated contact (XLR), soldered directly to the circuit board for
direct connection to the signal circuitry.
Modest power consumption of mere 6 Watts permits constant
GREEN TECHNOLOGY:
power-up operation to eliminate warm-up time and maximize musical performance,
and allows to operate enclosed into an entertainment unit.
CAPRI S2 PREAMPLIFIER
15 Amp female IEC AC power connector.
IEC:
 
REVA1.4 CAPRI S2 PREAMPLIFIER PAGE 7