Front Panel Functions - JEFF ROWLAND CAPRI S2 Operational Manual

FRONT PANEL FUNCTIONS

Before attempting any system interconnection, please familiarize yourself with the front panel
controls and indicators of the
illustration below:
(1) INPUT INDICATORS:
Selector Buttons. An indicator will illuminate green when selected to show that the input is
currently active.
(2) INPUT SELECTOR BUTTONS:
phono, etc.) connected to the associated rear panel inputs (see Rear Panel Signal
Connections on page 14). To select a desired input, press the corresponding Input Selector
Button. When an input is activated, the small, green
SELECTOR BUTTON
NOTE:
The display can be dimmed by depressing both the
simultaneously while rotating the
(3) BYPASS MODE:
The
home theater or surround sound system. Pressing this button will allow a multi-channel
processor to bypass the preampli er functions of the
volume controlled only by the external processor. The indicator light below the
button will illuminate yellow to show that the Bypass function is active.
NOTE: Input 5 can be switched between
instructions on page 19. Non Bypass Mode allows Input 5 to be utilized as a regular input
subject to default preampli er functions.
NOTE:
Do not connect a source component to the
volume control. The volume control of the
Mode is selected.
CAPRI S2 PREAMPLIFIER
Inputs 1 through 4 have a small indicator light below the Input
Pressing these buttons selects an input source (CD, tuner,
will illuminate.
VOLUME CONTROL
BYPASS MODE allows the
BYPASS MODE
CAPRI S2 PREAMPLIFIER
. The descriptions refer to the
INPUT INDICATOR
INPUT 1
and
.
CAPRI S2 PREAMPLIFIER
CAPRI S2 PREAMPLIFIER
and NON-BYPASS MODE
BYPASS
inputs if it does not have its own
is inactive when Bypass

REVA1.4 CAPRI S2 PREAMPLIFIER
below the INPUT
MUTE
buttons
to be installed in a
, with the
BYPASS
following the

PAGE 12