Functions Available During A Call; Setting The Handset Volume; Switching Between Handset And Hands-Free; Setting The Volume For Hands-Free - Maxcom KXT481SOS User Manual

9.4

Functions available during a call

Setting the
handset
volume
Switching
between
handset
and hands-
free
Setting the
volume for
hands-free
10

SOS EMERGENCY CALL

In order to establish an emergency call, press and hold for 3 seconds, the SOS
key on the phone or on the remote control. During an emergency call phone:
- Start a loud alarm to a person in the vicinity could provide immediate help
- Then the phone will select the sequence numbers set as alarm
- The speaker factory set (or recorded by the user) message: "The alarm call,
press the 0 key to answer"

10.1 Answering an emergency call SOS

The caller, who receives a call SOS will hear the message "Emergency call,
press the 0 key to answer". (If not changed by the user)
To confirm the connection must press "0" on his phone, on your phone hands-
free mode is activated for 2 minutes.
- After 2 minutes the call will be broadcast for 10 seconds warning sound "bi bi"
and to continue the conversation, the caller must press the "1" and then press "5"
- the call will be extended for another 2 minutes. When you hear the "bi bi"
proceed as before. When the message "bi bi" will not be pressed by the caller
number 1, then 5, the current connection will be terminated and automatically
attempt to connect with another emergency number
VOLUME CONTROL You can adjust the
switch, which is located under the handset
(13), (- Normally, + Loud).
During the conversation by headphone
press And place the handset on the
base to hold a conversation in hands-free
mode
LED lights up on the speakerphone
To hold a conversation via the handset lift it
from the base
Hands-free mode automatically turns off
Set the desired volume level using a
potentiometer invested with the right
side of the phone (17)
The setting can be possible only for the
speakerphone.
13
ENGLISH