Table of Contents
Advertisement
Line Settings
Specifying how the line is selected (dialing line setting)
If you have connected two lines to the machine, use this setting to specify how
the line is selected when you make a phone call or send a fax by manual
dialing. The settings are MANUAL and AUTO. When MANUAL is selected,
you must manually select the line each time you make a phone call. When
AUTO is selected, the machine will automatically select an open line.
The machine is initially set to MANUAL. If you wish to change the setting to
AUTO, follow the steps below.
Note: The dialing line setting does not apply to faxes sent by automatic dialing
(see page 90). When you send a fax by automatic dialing, the machine will
normally use line 2. The machine will only use line 1 if line 2 is busy.
1
FUNCTION
Press
the machine.
2
Press
3
Press
4
Press
machine will automatically select the
line), or
must select the line each time you
dial).
5
STOP
Press
36
once and
once on
once and
twice.
once.
to select AUTO (the
to select MANUAL (you
to return to the date and time display.
Display:
OPTION SETTING
DIALING LINE
DIALING LINE
1=AUTO, 2=MANUAL
The display briefly shows
your selection, then:
LINE 2 INVALID
Advertisement
Table of Contents
