Table 5. LCD Display Symbols (continued)
Sequ. No.
13
14
15
16
4. Power On Option
To release the Auto Power Off function, press and hold the
SELECT button when the meter is on.
5. Auto Power Off
When the meter has been on for 30 minutes without any action from
the user, the meter will automatically switch to the standby mode.
To bring back the display, turn the rotary switch to a different
position, push any button, or restart the meter.
6. Measurement Range
A measurement range determines the maximum measurement
value. Most of the functions of the meter have more than one range.
1. It is important to select the correct range
• If the range is too small, "OL" shows on the display for
overload.
• If the range is too large, the value of the reading will be very
small with less resolution.
2. Auto range and manual range options
• In the auto range mode, the meter automatically selects the
best range for the input detected.
• In the auto range mode, press the RANGE button to enter the
manual range and select the desired range.
All manuals and user guides at all-guides.com
Symbol
Temperature units
O
C
O
F
(
%
Percent symbol
nF / µ µ F
mV / V
Voltage units
Capacitance units
mA / A
Current units
Overload
-11-
Description
O
C not used on this meter)