Table of Contents
Advertisement
External speaker lead
Connect to an external speaker.
GPS receiver lead
Connect to a GPS receiver for position indication.
An NMEA0183 ver.2.0 or 3.01 (sentence formatters RMC, GGA, GNS,
GLL) compatible GPS receiver is required.
DC power connector
Connect the supplied DC power cable from this connector to an external 13.8V
DC power source. Do not connect to 24V storage battery.
Fuse replacement
One fuse is installed in the supplied DC power cable. If a fuse blows or the trans-
ceiver stops functioning, track down the source of the problem, if possible, and
replace the damaged fuse with a new, rated one.
Please power off before replacing the fuse, the required fuse is
3
DC15A/32V.
Dimensions
Advertisement
Table of Contents
