Table of Contents
Advertisement
6.
After the Position Report call has been transmitted, stand by on Channel 70
until an acknowledgement is received.
"WAIT ACK" scrolls at the channel comment indicator.
7.
Push any key to exit the condition and return to the normal operation.
Receiving a Position Request call
While monitoring Channel 70 and a Position Request call is received:
1.
"DSC" appears and "RCV POS REQUEST" scrolls at the channel comment
indicator.
2.
Push any key to stop the beep.
[DSC] to reply to the call; Push any other key to ignore the call.
3.
Push
Receiving a Position Report call
While monitoring Channel 70 and a Position Report call is received:
1.
"DSC" appears and "RCV POS REPORT" scrolls at the channel comment
indicator.
2.
Push any key to stop the beep.
[DSC] to reply to the call; Push any other key to ignore the call.
3.
Push
The 'Latitude' and 'Longitude' from the called station is displayed and
scrolled automatically in order of Latitude co-ordinates and then Longitude
co-ordinates after replying the call.
Receiving a Position Reply call
While monitoring Channel 70 and a Position Reply call is received:
1.
"DSC" and "POS REPLY" appear in the display.
The 'Latitude' and 'Longitude' from the called station is displayed and
scrolled automatically in order of Latitude co-ordinates and then Longi-
tude co-ordinates.
2.
Push any key to stop the beep.
Receiving a Position Report Reply call
While monitoring Channel 70 and a Position Report Reply call is received:
1.
"DSC" and "POS REPLY" appear in the display.
The 'Latitude' and 'Longitude' you have sent is displayed and scrolled
automatically in order of Latitude co-ordinates and then Longitude co-
ordinates.
2.
Push any key to stop the beep.
20
Advertisement
Table of Contents
