Table of Contents
Advertisement
Set mode programming
Set mode is used to change the conditions of the transceiver's functions: Scan type
(Normal or Priority), Scan resume timer, Weather alert, Dual/Tri-watch, DSC watch,
Beep tone, Auto acknowledgement and Favorite channel function.
Set mode operation
1.
Turn power OFF.
2.
While pushing [16], turn power ON to enter Set mode.
3.
After the display appears, release [16].
"SCAN" appears at the channel comment indicator.
4.
Push [16] to select the desired item, if necessary.
5.
Push [▲] or [▼] to select the desired condition of the item.
6.
Turn power OFF, then ON again to exit Set mode.
No.
Display
Item
1
SCAN
Scan type
Scan resume
2
TIMER
timer
3
WX ALERT
Weather alert
4
DUAL
Dual/Tri-watch
5
DSC WATCH
DSC watch
6
BEEP
Beep tone
Auto acknowl-
7
AUTO ACK
edgement
8
FAVORITE CH
Favorite channel
Set mode items
Scan type
21
SET M O D E
Option
Default
n- (normal scan)
n- (normal
scan)
/ p- (priority scan)
of (OFF) / on (ON)
of (OFF)
of (OFF) / on (ON)
of (OFF)
d-(Dualwatch)
d-(Dualwatch)
/ t- (Tri-watch)
of (OFF) / on (ON)
of (OFF)
of (OFF) / on (ON)
on (ON)
of (OFF) / on (ON)
of (OFF)
of (OFF) / on (ON)
on (ON)
The transceiver has 2 scan types: Normal scan and Priority scan. Normal scan
searches all TAG channels in the selected channel group. Priority scan searches
all TAG channels in sequence while monitoring Channel 16.
Scan resume timer
The scan resume timer can be selected as a pause (OFF) or timer scan (ON).
When OFF is selected, the scan pauses until the signal disappears. When ON is
selected, the scan pauses 5 sec. and resumes even if a signal has been received
on any other channel than Channel 16.
Weather alert
A NOAA broadcast station transmits a weather alert tone before important
weather information. When the weather alert function is turned ON, the trans-
ceiver detects the alert, then the "WX ALT" indicator blinks until the transceiver is
operated. The previously selected (used) weather channel is checked any time
while scanning.
"WX ALT" appears instead of "WX" indication when the function is set
ON.
Dual / Tri-watch
This item can be selected as Dualwatch or Tri-watch.
DSC watch
DSC watch monitors Channel 70 while you are receiving another channel.
If a distress signal is received on Channel 70, the transceiver monitors Channel
16 and 70 alternately until the distress signal disappears. If a signal is received
on another channel, DSC watch pauses until the signal disappears.
This function may not be available for some channel groups depending
on dealer setting.
"DSC WATCH" scrolls at the channel comment indicator.
Beep tone
Advertisement
Table of Contents
