Table of Contents
Advertisement
[▲] or [▼] to input 9-digit of the appropriate address ID.
4.
Push
Push [16] or [CH/WX] to move the cursor forward or backward, respec-
tively.
Push [SCAN] to cancel and exit the condition.
Note: 1
st
digit "0" is fi xed for a group ID. When you input 1
the ID is automatically registered as a group ID.
5.
After inputting 9-digit ID, push
[▲] or [▼].
P
ush [16] or [CH/WX] to move the cursor forward or backward, respec-
tively.
sh [SCAN] to cancel and exit the condition.
Pu
[DSC] to program and exit the DSC menu.
6.
Push
Deleting address ID
1.
Push [DSC] to enter the DSC menu.
2.
Push [▲] or [▼] to select "ADDRESS" and push [DSC].
[▲] or [▼] to select "DEL", then push [DSC].
3.
Push
13
st
digit "0" and other 8 digits,
[DSC] to input 5 characters ID name using
When no address ID is programmed, "NO ID" is displayed.
[▲] or [▼] to select the desired ID name for deleting and push [DSC],
4.
Push
"READY" appears.
Distress call
A Distress call should be transmitted if, in the opinion of the master, the ship or a
person is in distress and requires immediate assistance.
Note: Never use the Distress call when your ship or a person is not in an emer-
gency. A Distress call can be used only when immediate help is needed.
Transmitting a Distress call
1.
While opening the key cover, push
Distress call.
Emergency channel (Channel 70) is automatically selected and the Dis-
tress call is transmitted.
2.
After transmitting the call, the transceiver waits for an acknowledgment call
on Channel 70.
The Distress call is automatically transmitted about every 4 minutes.
"DSC REPEAT" scrolls at the channel comment indicator.
[DISTRESS] for 5 sec. to transmit the
Advertisement
Table of Contents
