Table of Contents
Advertisement
MMSI code programming
The 9-digit MMSI (Maritime Service Identity: DSC self ID) code can be programmed
at power ON.
[VOL] to turn power OFF.
1.
Rotate
[DSC], turn power ON to enter MMSI code pro-
2.
While pushing and holding
gramming condition.
3.
After the display appears, release
4.
Edit the specifi ed MMSI code by pushing
[16] or [CH/WX] to move the cursor forward or backward, respec-
Push
tively.
[DSC] to set the code.
5.
Input 9-digit code, then push
Returns to the normal operation.
Note:
This code programming can be performed only twice. After the code pro-
gramming, it can be changed only by your dealer or distributor.
MMSI code check
The 9-digit MMSI (DSC self ID) code can be checked.
[DSC] to enter the DSC menu.
1.
Push
[▲] or [▼] to select "MMSI" and push [DSC].
2.
Push
DS C O PERAT I O N
[DSC], a cursor starts blinking.
[▲] or [▼].
3.
Check the 9-digit MMSI (DSC self ID) code.
The MMSI code is displayed and scrolls at the channel comment indica-
tor.
[DSC] to return to the normal operation.
4.
Push
DCS address ID
A total of 30 DSC address IDs (9-digit) can be programmed and named with up to
5 characters.
Programming address ID
[DSC] to enter the DSC menu.
1.
Push
[▲] or [▼] to select "ADDRESS", and push [DSC].
2.
Push
[▲] or [▼] to select "ADD", and push [DSC].
3.
Push
12
Advertisement
Table of Contents
