[DSC] to enter the standby condition for Individual acknowledgement
4.
Push
call.
"READY" appears at the channel comment indicator.
[DSC] to transmit the acknowledgement to the selected station.
5.
Push
6.
After the Individual acknowledgement has been transmitted, the display
changes to the channel specifi ed by the calling station automatically when
"ABLE" is selected.
Receiving an Individual call
While monitoring Channel 70 and an Individual call is received:
1.
The emergency alarm or beeps sound depending on the received category.
2.
"DSC" appears and "RCV INDIVIDUAL" scrolls at the channel comment in-
dicator.
3.
Push any key to stop beep.
[DSC] to reply the call and select the channel specifi ed by the calling
4.
Push
station for voice communication; Push any other key to ignore the Individual
call.
Group call
The Group call function allows you to transmit a DSC signal to a specifi c group
only.
Transmitting Group call
[DSC] to enter the DSC menu.
1.
Push
[▲] or [▼] to select "GROUP", and push [DSC].
2.
Push
[▲] or [▼] to select the desired pre-programmed group address, and
3.
Push
push [DSC].
The ID code for the Group call must be set in advance.
16