Add A Wi-Fi Network - Datalogic Memor 10 User Manual

Add a Wi-Fi Network

1. Tap Settings > Network & Internet and verify that the Wi-Fi is
turned on.
2. Tap Wi-Fi.
3. Tap Add network at the end of the available network list:
4. Enter the Network SSID (Wi-Fi network name). For secure Wi-Fi
network connections, tap None under Security, and then select
the type of security protocol required from the pop-up menu
(e.g., WEP, WPA/WPA2 PSK or 802.1xEAP). Enter any additional
security information required by the type of security protocol
selected.
User's Manual
Settings
59