Battery Safety Guidelines - Datalogic Memor 10 User Manual

Battery Safety Guidelines

WARNING
User's Manual
Installing, charging and/or any other action should be
done by authorized personnel and following this
manual.
The battery pack may get hot, explode, ignite, and/or
cause serious injury if exposed to abusive conditions.
If the battery pack is replaced with an improper type,
there is risk of explosion and/or fire.
Use the battery box to carry the battery pack, do not
put the battery pack in your pocket.
Do not place the battery pack in or near a fire or other
heat source; do not place the battery pack in direct
sunlight, or use or store the battery pack inside
unventilated areas in hot weather; do not place the
battery pack in microwave ovens, in clothes dryers, in
high pressure containers, on induction cook surfaces
or similar devices. Doing so may cause the battery
pack to generate heat, explode or ignite. Using the
battery pack in this manner may also result in a loss
of performance and a shortened life expectancy.
To power the cradle, use only a Datalogic approved
power supply. The use of an alternative power supply
will void the product warranty, may cause product
damage and may cause heat, an explosion, or fire.
The area in which the units are charged should be
clear of debris and combustible materials or
chemicals.
Do not use the battery pack of this terminal to power
devices other than this terminal.
Battery
21