Table of Contents
Advertisement
3. If the PIN option is enabled on the ScreenBeam, another dialog box will appear
asking for the PIN as follows:
Enter the corresponding PIN and tap Ok.
4. The iOS device should now be mirroring to the front-of-room display.
5. To disconnect the iOS device from the front-of-room display, swipe upward from the
bottom of the iOS device screen, or inward from the top-right corner on newer
versions of iOS, to bring up the Control Center. Tap on Screen Mirroring, then tap
on Stop Mirroring.
© 2018 Actiontec Electronics Inc. All rights reserved.
17
ScreenBeam Deployment Guide
- Quick Links:
- Part II Setting up Screenbeam
Hide quick links:
Advertisement
Table of Contents
