Part Viii Setting Up Firewall; Macos - ActionTec Screenbeam 960 Deployment Manual

Part VIII Setting up Firewall

The system firewall in the operating system and any additional firewalls or port-filtering
devices must be properly configured to use Wireless display over LAN. This section details
the requirements for setting up such firewalls.

8.1 macOS

If macOS is being used, it is recommended to disable firewall on the system or allow all ports.
If a limited number of open ports is required for network policy reasons, open the following
ports for Wireless display over LAN:
35507 (TCP)
•
8554 (TCP)
•
24030 (UDP)
•
The firewall must allow incoming connections for the app "test-wfd" if enabled, as follows:
© 2018 Actiontec Electronics Inc. All rights reserved.
25
ScreenBeam Deployment Guide