Part I Introduction; Key Features - ActionTec Screenbeam 960 Deployment Manual

Part I Introduction
Actiontec's ScreenBeam 960 receiver brings wireless display capability to a variety of
devices and operating systems, both with native screen mirroring capability and those that
do not. ScreenBeam 960 allows for an optimal experience in installation, deployment,
management and end-user satisfaction. Native P2P screen mirroring with direct connection
via Miracast is built into ScreenBeam 960 for Windows 10/8.1 and Android 4.2 and later
Miracast devices. The information contained in this document outlines the general features,
requirements and recommendations for all other presentation scenarios for ScreenBeam 960,
including streaming over LAN using apps and native macOS/iOS screen mirroring. For
instructions on connection via native mirroring for Windows 10/8.1 and Android, please visit
https://www.screenbeam.com/setup.

1.1 Key Features

Key features of ScreenBeam 960 include:
Native wireless display support without apps for modern operating systems
•
Wireless display on legacy devices and operating systems over LAN
•
Fast, responsive and stable wireless display connection
•
Secured user connection with PIN to limit access to authorized display sources
•
Video and audio streaming support for responsive screen mirroring
•
USB HID support for front-of-room touch screen collaboration
•
Analog line audio out for external audio amplification or capture
•
VGA pass-through input for wired connection to sources for display
•
VGA video out for projectors and legacy display devices
•
HDMI video out with HDCP for modern display devices
•
© 2018 Actiontec Electronics Inc. All rights reserved.
4
ScreenBeam Deployment Guide