Output Status
"Output bandwidth" - maximum bitrate with currently selected RF output settings.
"Output usage" - current usage of output bandwidth in percents.
7.3.3. List of services table
The table (Figure 13) shows all of the input transport stream services, including different details (type, name, identifier).
Also UDP unicast streaming via the control interface can be started, services for descrambling by CA module can be selected
and descrambling status observed. In the „Enable" column services for output TS are selected. Column „CC errors" shows
incoming TS CC error (continuity count error) status.
The service type icon meanings:
Click on the "Watch" button to see selected channel. The module will start an UDP unicast streaming via the control
interface. Maximum output bitrate of the UDP unicast is 8 Mbps (for TS monitoring only). VLC Media Player must be installed,
downloadable from
http://www.videolan.org/.
Figure 13. The "List of services" table
SD TV service,
HD TV service,
Figure 14. UDP streaming video
7
radio service.