Event Logs; Export Parameters; Import Parameters - Terra tdx410C Manual

7.7.1 Event logs

Move the mouse on the System menu tab then click on the "Event logs" line. The event logs screen will appear.
This enables you to see a list of the log messages of the module. Log contents remains after the power loss of module.
Events in the log e are sorted by time – the newest are in the beginning. Information events are shown in blue background,
error messages are in red. After switching on the unit, the current date is set to 2000:01:01 and time to 00.00.00. When the
MPEG stream is received, the information about the date is decoded too, and the values of these parameter are corrected.
Local time offset in the log is used from the time parameters table (see Figure 19). You can filter required messages setting
corresponding "Logs filtering" checkboxes.

7.7.2. Export parameters

All of the data established on the module can be saved onto a backup file. Inversely, the configuration data saved on an
appropriate file can be restored on the module. Move the mouse on the System menu tab then click on the "Export parameters"
line. A window is displayed which allows you to select the action for the data file for the current module configuration. You
need to select the "save file to disk" option.

7.7.3. Import parameters

Select this option in "System menu" tab. The Import parameters window is displayed.
Figure 22. Event logs table
Figure 23. Import parameters window
11