Firmware Upgrade; User Management; Restore Defaults; Restart The Device - Terra tdx410C Manual

Click on "Click to select file" and select the file containing the configuration data that you wish to restore on the module.
Once you have selected the file, click on the "Upload" button at the bottom of the screen. The upload confirmation window will
be displayed.

7.7.4. Firmware upgrade

If you wish to update the module's firmware, select this option in "System menu". The card displayed shows the firmware
version that the module has at the present time.
Click on "Click to select file" and select the firmware update file from the hard drive. When the file name is in the box, click
on "Upload". The new firmware will be installed on the module.

7.7.5. User management

Select this option in "System menu" tab. The user management window is displayed.
This window consists of two tables: "Change password" and "User management". The „Change password" table allows
you to change the password. Enter the new password in the "New password" field and confirm the new password retyping it
in the "Repeat new password" field. The change of password will not take effect until you press the "Modify" button.
In the "User management" table you can manage users, who will be able to login into the module. Enter the new username
and password in the appropriate fields, select desired role for user and press the "Add" button to add new user or "Update"
button to change settings of the user. User role "Admin" enables the password change function and user management function.
User role "User" enables only password change function and read only function for parameters. Press the "Remove" button
to remove user from list.
NOTE: By giving your personal password or user access account for another person, you take full responsibility for all
module settings modifications made by that person or anyone else they may give the password to.

7.7.6. Restore defaults

Clicking on the "Restore defaults" submenu in the "System menu" tab resets the configuration of the streamer module to
the factory default values. The Control ip parameters remains unchanged.

7.7.7. Restart the device

Clicking on the "Restart the device" submenu in the "System menu" tab causes the module to restart.
7.7.8. Language
If you wish to change the module's menu language, select this option in "System menu".
Figure 24. Firmware upgrade table
Figure 25. User management window
12