Table of Contents
Advertisement
10
www.aeg.com
4.6 PowerBoost
This function activates more power for
the appropriate induction cooking zone,
and it depends on the cookware size.
The function can be activated only for a
limited period of time.
Touch
to activate the function for the
cooking zone.
The symbol turns red.
The function deactivates automatically.
For maximum duration
values, refer to "Technical
data".
4.7 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
Set the heat setting for the appropriate
cooking zone and then set the function.
1. Touch
change the time.
The timer digits 00 and the indicators
and
come on the display.
red, and
If the timer is not set, all indicators
disappear after 4 seconds.
2. Touch
99 minutes).
After 3 seconds, the timer starts to count
down automatically. The indicators
, and
When the time comes to an end, a signal
sounds and 00 flashes. To stop the
signal, touch
To deactivate the function: touch
indicators
to set 00 on the display. Alternatively,
set the heat level to 0. As a result, a
signal sounds and the timer is cancelled.
to activate the function or
turns white.
or
to set the time (00 -
disappear.
stays red.
.
and
come on. Use
CountUp Timer (The count
up timer)
You can use this function to monitor how
long a cooking zone operates.
Touch
The indicator
starts to count up automatically.
To deactivate the function: touch
When the indicators light up, touch
Minute Minder
You can use this function when the hob is
activated but the cooking zones do not
operate.
To see the control panel, place a pot on
a cooking zone.
1. Touch
red, to activate the function.
2. Touch
The function starts automatically after 4
seconds. The indicators
disappear.
When you set the function, you can
remove the pot.
turns
When the time comes to an end, a signal
sounds and 00 flashes. Touch
the signal.
To deactivate the function: touch
indicators
to set 00 on the display.
,
4.8 Pause
. The
This function sets all cooking zones that
operate to the lowest heat setting.
or
When the function operates, all other
symbols on the control panels are
locked.
When the function is active,
symbols can be used.
twice to activate the function.
turns red, the timer
, until the indicator
or
to set the time.
,
stays red.
and
light up. Use
The function has no effect
on the operation of the
cooking zones.
.
.
turns
, and
to stop
. The
or
and
Advertisement
Table of Contents
