AEG IKE64651FB User Manual page 12

12 www.aeg.com
Mode H6
1) The hob detects the boiling process and acti-
vates the fan speed in accordance with the auto-
matic mode.
2) The hob detects the frying process and acti-
vates the fan speed in accordance with the auto-
matic mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
The display comes on and goes off.
3. Touch
4. Touch
on.
5. Touch
automatic mode.
When you finish cooking and deactivate
the hob, the hood fan may still operate
for a certain period of time. After that
time the system deactivates the fan
automatically and prevents you from an
accidental activation of the fan for the
next 30 seconds.
To operate the hood directly
on the hood panel
deactivate the automatic
mode of the function.
Operating the fan speed
manually
You can also operate the fan from the
hob manually.
Touch when the hob is active.
This deactivates automatic operation of
the function and allows you to change
the fan speed manually.
When you press
speed by one. When you reach an
intensive level and press
Auto-
1)
Boiling Frying
matic
light
On Fan Fan
speed 2 speed 3
for 3 seconds.
for 3 seconds.
a few times until
of the Timer to select an
, you raise the fan
again, you
set the fan speed to 0 which deactivates
the hood fan. To start the fan again with
2)
the fan speed 1 touch
To activate an automatic
operation of the function,
deactivate the hob and
activate it again.
4.12 OffSound Control
(Deactivating and activating
the sounds)
Deactivate the hob first.
1. Touch
the function.
The display comes on and goes out.
2. Touch
or
3. Touch
of the following:
•
comes
•
4. Wait until the hob deactivates
automatically to confirm your
selection.
When the function is set to
hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
4.13 Power management
function
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
.
for 3 seconds to activate
for 3 seconds.
comes on.
of the timer to choose one
- the sounds are off
- the sounds are on
you can