QUICK START
Please read the entire manual to gain a full understanding of the Baja Rey vehicle, fine-tuning the setup and performing maintenance.
1. Read the safety precautions found in this manual.
2. Charge a battery for the vehicle. Refer to the included charging warnings
and instructions for battery charging information.
3. Install the AA batteries in the transmitter. Only use alkaline
or rechargeable batteries.
4. Install the fully charged battery in the vehicle.
CHARGING THE BATTERY
Choose batteries designed to work with the Dynamite
Waterproof ESC. We recommend standard LiPo batteries. 4S recommendation: the
Dynamite
®
Reaction HD 7.4V 5000mAh 50C 2S LiPo, Hardcase: EC5 (DYNB3810EC) x2;
6S recommendation: the Dynamite
®
Hardcase: EC5 (DYNB3811EC) x2; 8S recommendation: the Dynamite
14.8V 5000mAh 50C 4S LiPo, Hardcase: EC5 (DYNB3804EC) x2.
TABLE OF CONTENTS
QUICK START .............................................................................................................3
CHARGING THE BATTERY .........................................................................................3
BOX CONTENTS .........................................................................................................3
AUX CHANNELS ...................................................................................................4
INSTALLING THE BATTERY........................................................................................5
DRIVING PRECAUTIONS ...........................................................................................6
RUN TIME...................................................................................................................7
ESC FUNCTIONS ........................................................................................................8
TROUBLESHOOTING GUIDE .....................................................................................9
LIMITED WARRANTY ................................................................................................9
FCC INFORMATION ............................................................................................10
IC INFORMATION ...............................................................................................10
REPLACEMENT PARTS ......................................................................................37-38
OPTIONAL PARTS ....................................................................................................39
EXPLODED VIEWS .............................................................................................40-46
SUPER ROCK REY
SUPER ROCK REY
ROCK RACER: 1:6 4WD RTR, AVC • INSTRUCTION MANUAL
ROCK RACER: 1:6 4WD RTR, AVC • INSTRUCTION MANUAL
®
®
Fuze™ 160A Brushless
®
Reaction HD 11.1V 5000mAh 3S LiPo Battery,
Reaction HD
®
5. Power ON the transmitter and then the vehicle. Wait 5 seconds for the ESC to
initialize. Always power the transmitter ON before the vehicle and power it OFF
after the vehicle has been powered OFF.
6. Check the steering and throttle control directions. Verify that the servos
are moving in the correct direction.
7. Drive your vehicle.
8. Perform any necessary maintenance.
Choose a charger designed to charge Li-Po batteries. We recommend the Dynamite
Passport P1 Mini AC Input Balance Charger/Discharger (DYNC3015). Refer to your battery
and charger manuals for usage, safety, and charging information.
BOX CONTENTS
• Losi
Super Rock Rey
RTR with AVC
®
®
• Spektrum™ DX2E 2.4GHz Transmitter (SPM2335)
• Spektrum™ 6-Channel DSMR
®
• Spektrum™ 18KG Waterproof 1/5-Scale Servo (SPMS904)
• Dynamite
®
Fuze™ 160A BL WP 1/5-Scale ESC: 8S (DYNS2661)
• Dynamite
Fuze™ 1/6 Brushless Motor 750Kv (DYNS1670)
®
• 4 AA batteries (for transmitter)
REGISTER YOUR LOSI PRODUCT ONLINE
Register your vehicle now and be the first to find out about the latest option parts, product
updates and more. Click on the Support tab at www.losi.com and follow the product
registration link to stay connected.
Technology: 1/6-Scale 4WD Rock Racer
®
AVC2 Surface Receiver (SPMSRS6000)
EN
EN
®
3
3