Login - Datamars R-IN1300 MID User Manual

All parameters described in this manual refer to the "High Frequency Reader R-IN 1300 MID".
The graphical application requires a Java2 or Java5 plug-in. If the requested plug-in is already
installed on your PC, you are immediately able to run the application. Otherwise the system will try to
connect to the WWW to download the plug-in. In this case, follow every installation step always
accepting the defaults suggested by the system.
L
4.4
OGIN
The interface running on the browser permits access to users only via login (user name & password):
attempts to join the configuration- and monitoring tools directly via bookmarks are prevented from the
system.
A user trying to connect while the system is already occupied (i.e. by another user having logged in
before) gets access in read-only mode thus preventing the configuration from being modified at the
same time by more users.
When the user closes the browser, the system becomes free, allowing other users to login and get
read-write mode.
If the currently logged in user forgets to close the browser, she/he is automatically disconnected from
the system. This is done on timeout-basis: if nobody presses any button for a time period longer than
10 minutes, the system makes the session available for other users.
The administrator (only she/he) can force the system to disconnect users when the system is kept
busy too long.
The default accounts are defined as follows, passwords can be changed.
R-IN 1300 MID User Manual – Rev 3.0
User Names Default Passwords
admin Admin (read, modify and
administrative rights )
user1 1234 (read and modify rights)
user2 1234 (read-only rights)
DATAMARS
14 (40)