BenQ PD Series User Manual page 18

5. Connect the Hotkey Puck G2 to the monitor.
Connect the Hotkey Puck G2 to the mini USB port (exclusively or Hotkey Puck G2 connection) on the
rear of the monitor. For more information on Hotkey Puck G2, see
operations on page
6. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the
other end to a power outlet just yet.
7. Install the back cover.
Align the back cover with the holes on the back of the
monitor, and press both sides and the upper part of the
cover against the holes to lock it into place as
illustrated.
Push the lower part of the back cover toward the
monitor to secure it.
8. Organize the cables.
Route the cables via the cable clip.
18 How to assemble your monitor hardware
37.
Hotkey Puck G2 and its basic
1
2